Progard Plastics Logo


High Impact ABS Capped With PMMA - Durasun AB401

APPLICATIONS : External doors, conservatories, roof tiles.

Product Data Information

Property Method Units Value Capping
Tensile Strength at Yield ISO 527 MPa 36 42
Flexural Strength ISO 178 MPa 50 64
Izod Impact Strength ISO 180 J/m 320 32
Heat Deflection Temperature ISO 75 ºC 97 84
Vicat Softening Point ISO 306 ºC 95 88
Density (1) ISO 1183 1.1 1.1
Flammability Rating @ 1.5 mm UL94 Class HB HB
Optical Semi Matt Finish
Optical AB401SM - Semi-matt

The above information represents typical property values that are based on information supplied by polymer raw material
(1) Density value for natural unpigmented sheet - this value can change, the magnitude of such depending on the pigment
type and loading.

Note: We reserve the right to make alterations without further notice. Information in this data sheet is intended as a guide only. No liability is accepted for loss or damage arising from use or reliance on this information, or if such infringes any patent.

Physical Properties

Sheet Thickness 1.5 - 8.0 mm
Sheet Width 500 - 2000mm
Minimum Quantity = 2000 kgs

1) Range of embossed surfaces available on thickness greater than 2.0 mm and widths less than 1520 mm
2) Matt finish not available on embossed sheet
3) Usually run in production campaigns.
4) Widths, > 1520mm, MOQ 5 tonnes

For requirements outside these limits please contact your local AEL sales office.


Work with us so we can offer you "The Competitive Edge".