×
Progard Plastics employs best practice techniques and offering bespoke solutions to our clientele.
T (03) 9768 2412
Email: sales@progardplastics.com.au
Progard Plastics Pty Ltd
3 Mickle Street, Dandeong South VIC 3175
APPLICATIONS : Sanitary-ware applications where good impact and a high gloss finish, combined with good surface scratch resistance and high definition are required.
| Property | Method | Units | Value | Capping |
|---|---|---|---|---|
| Tensile Strength at Yield | ISO 527 | MPa | 36 | 48 |
| Flexural Strength | ISO 178 | MPa | 50 | 83 |
| Izod Impact Strength | ISO 180 | J/m | 320 | 32 |
| Heat Deflection Temperature | ISO 75 | ºC | 97 | 90 |
| Vicat Softening Point | ISO 306 | ºC | 95 | 95 |
| Density (1) | ISO 1183 | 1.1 | 1.1 | |
| Flammability Rating @ 1.5 mm | UL94 | Class | HB | HB |
| Optical | High Gloss Finish | |||
The above information represents typical property values that are based on information supplied by polymer raw material suppliers.
(1) Density value for natural unpigmented sheet - this value can change, the magnitude of such depending on the pigment type and loading.
Note: We reserve the right to make alterations without further notice. Information in this data sheet is intended as a guide only. No liability is accepted for loss or damage arising from use or reliance on this information, or if such infringes any patent.
| Sheet Thickness | 2 - 8.0 mm |
| Sheet Width | 500 - 2000mm |
| Minimum Quantity = 1000 kgs | |
Notes:
1) Range of embossed surfaces available on thickness greater than 2.0 mm and widths less than 1350 mm
2) Strong colours, MOQ 2 tonnes
3) Embossed sheet, MOQ 2 tonnes
For requirements outside these limits please contact your local AEL sales office.